View unanswered posts | View active topics It is currently Fri Mar 29, 2024 8:06 am



Reply to topic  [ 21 posts ]  Go to page 1, 2  Next
Visit to see James's Garage in Launceston 
Author Message
User avatar

Joined: Fri Sep 26, 2008 6:16 am
Posts: 1157
Location: Adelaide north near the hills.
Car(s): Roman Red 1965 Sedan, Mint 67 Sedan Auto, 1967 GT , 1.5x 1967 sedans, 1968 Deluxe Sedan, 1965 Wasp Ute (Resto project)
Reply with quote
Josh and i were very fortunate to be invited down to Launie to see the work in progress of the Track Sedan that James has been developing.
WOW

WOW

WOW

i think the amount of work and thought and effort gone into this car is not unlike the job being done here in SA by Chris who has fitted a late 1600cc Twin Cam into his sedan body.

The first engine blew up, so it was back to the drawing board with some fresh ideas and a bullet proof engine build.
The build was focused on the basic engine with a Electronic ignition and turbo manifold feeding a webber carbi.
VL commodore fuel pump feeding the engine with various safety systems built in to keep the engine from damage.
running approx 8.3 compression with 6-9lb boost. no crazy turbo kick in, just masses of torque and power.

i have taken quite a few photos but will send them onto James and allow him to choose which ones to put up on the site.

Needless to say its one of the tidiest and unique builds i have seen using a basic OHV Bellett engine.

He has driven only very briefly on the road but is 95% plus complete.

looking forward to seeing it in action on a track or a hillclimb too.

OZ

_________________
So many toys and so little time to play!!


Thu Oct 23, 2014 1:42 am
Profile
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2816
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
oz_toffa wrote:
Josh and i were very fortunate to be invited down to Launie to see the work in progress of the Track Sedan that James has been developing.
WOW

WOW

WOW

i think the amount of work and thought and effort gone into this car is not unlike the job being done here in SA by Chris who has fitted a late 1600cc Twin Cam into his sedan body.

The first engine blew up, so it was back to the drawing board with some fresh ideas and a bullet proof engine build.
The build was focused on the basic engine with a Electronic ignition and turbo manifold feeding a webber carbi.
VL commodore fuel pump feeding the engine with various safety systems built in to keep the engine from damage.
running approx 8.3 compression with 6-9lb boost. no crazy turbo kick in, just masses of torque and power.

i have taken quite a few photos but will send them onto James and allow him to choose which ones to put up on the site.

Needless to say its one of the tidiest and unique builds i have seen using a basic OHV Bellett engine.

He has driven only very briefly on the road but is 95% plus complete.

looking forward to seeing it in action on a track or a hillclimb too.

OZ


Love to see plenty of pictures of the build. Also from Chris too.

_________________
'72 PR60 Sport


Thu Oct 23, 2014 1:49 am
Profile WWW
User avatar

Joined: Sat Oct 10, 2009 7:52 am
Posts: 685
Car(s): 67 Bellett Auto Sedan, 65 Wasp, 73 Chev Luv, 1/2 A Chev Luv, VX Commodore
Reply with quote
WOW, WOW, WOW is an understatement!!
Awesome work on an amazing car, by a dedicated Bellett owner and REALLY Great bloke.
Josh


Thu Oct 23, 2014 4:26 am
Profile
User avatar

Joined: Tue Jun 18, 2013 5:09 am
Posts: 428
Location: Sydney NSW
Car(s): PR91 1967 GT, PR20 1966 1/2 with GT Goodies
Reply with quote
Thanks for such kind words of encouragement Oz and Josh
I really wanted to get Asroc to the Nationals but just couldn't get in enough testing beforehand.
It was just as well as we had a good blast on the back roads thanks to Yellowperil on Saturday afternoon
:D
It was soooo great at the Nationals
What a great 'Family' Bellett people are!
I have some great friends
I'm happy to post some pickies so here are a couple
Cheers
James


Attachments:
image.jpg
image.jpg [ 2.14 MiB | Viewed 30618 times ]
image.jpg
image.jpg [ 2.26 MiB | Viewed 30618 times ]
image.jpg
image.jpg [ 1.87 MiB | Viewed 30618 times ]

_________________

To increase the fun, add a hair dryer
Thu Oct 23, 2014 6:52 am
Profile

Joined: Mon Jan 05, 2009 10:39 am
Posts: 1136
Location: Adelaide Hills
Car(s): GU Patrol, AU ute, 1969 florian deluxe, 1976 Luv & 1980 KB 4x4 isuzu
Reply with quote
that looks nice! would love to see more!

_________________
I am "that" Florian guy.
never buy a car you cant push.


Thu Oct 23, 2014 8:07 am
Profile
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2816
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
a work of art. I am amazed you fitted all that in there

glenn

_________________
'72 PR60 Sport


Thu Oct 23, 2014 8:36 am
Profile WWW
User avatar

Joined: Fri Sep 26, 2008 6:16 am
Posts: 1157
Location: Adelaide north near the hills.
Car(s): Roman Red 1965 Sedan, Mint 67 Sedan Auto, 1967 GT , 1.5x 1967 sedans, 1968 Deluxe Sedan, 1965 Wasp Ute (Resto project)
Reply with quote
and the setup for fuel and battery in the boot is 2nd to none as well.

many many many hours of painstaking work in that car.

a real reflection of the dedication of the owner. very nicely done, James.

hope you get it to the mainland one day too.

OZ

_________________
So many toys and so little time to play!!


Thu Oct 23, 2014 9:50 am
Profile
User avatar

Joined: Tue Oct 28, 2008 12:17 pm
Posts: 2611
Location: Rye Park, N.S.W.
Car(s): Doris, AuntyMary, Shrek, Jimmy; GT, Wasp, Flo & Sed unrestos; 65 Elf; 82 Rodeo, 60 TX550, 72 Sport, & a Sigma.
Reply with quote
I can now add my praise to James building efforts. We had the privellage of viewing the car when we landed in Tas 4 weeks ago. There was joy in seeing the head repaired like new and in place instead of lying idle in my shed. This is an amazing car, and it was so close to being at the Nats, but time is always the hardest ingredient to find. It was difficult not telling anyone about it, in the hope it would make an appearance.

We are very grateful to you James for the hospitality and a fine time when we visited. Some great stories were shared.
Hopefully we can return the favour some time.
Cheeers, Matt and family.

_________________
Life is far too short not to fill it with what you love. - Jackie French.[/size]


Thu Oct 23, 2014 10:59 am
Profile
User avatar

Joined: Tue Sep 29, 2009 10:15 am
Posts: 280
Location: Hobart
Car(s): 1970 Bellett, 1968 Bellett, Triumph Stag, 1940 Traction Avant, T Ford 1938 Pontiac plus the usual modern stuff
Reply with quote
Hi all
James' racer is a serious bit of commitment, knowhow and patience. The work that has gone into it is amazing. It's also a ... wait foooor it...SEDAN!!!

As an update, we'll be heading into country Tas in a few days following up on a find by Gt Orph and friends while they were sightseeing after the nationals.
One of my spies tell me that they were sighted poking around some Belletts. But even though they were driving sedans at the time the locals easily identified them as smarmy, smooth-talking Gt owners from Queensland which will not help James and myself as we follow in their footsteps. To make matters worse we will be arriving in banjo country driving a Nissan..... (gulp)

In order to overcome the obvious difficulties which members will readily identify, we will be going to the tattooist shop all Thursday and then buying some black leotards with matching black singlets so that upon our arrival in town, the locals will think we are champion cage-fighters and leave us alone to hunt Belletts....... hopefully!

Photos to follow.

YP

_________________
Bellett SEDANS are proof that the gods love us and want us to be happy.


Tue Nov 11, 2014 10:40 am
Profile
User avatar

Joined: Tue Oct 28, 2008 12:17 pm
Posts: 2611
Location: Rye Park, N.S.W.
Car(s): Doris, AuntyMary, Shrek, Jimmy; GT, Wasp, Flo & Sed unrestos; 65 Elf; 82 Rodeo, 60 TX550, 72 Sport, & a Sigma.
Reply with quote
:lol: :lol:

_________________
Life is far too short not to fill it with what you love. - Jackie French.[/size]


Tue Nov 11, 2014 12:18 pm
Profile
User avatar

Joined: Sat Oct 10, 2009 7:52 am
Posts: 685
Car(s): 67 Bellett Auto Sedan, 65 Wasp, 73 Chev Luv, 1/2 A Chev Luv, VX Commodore
Reply with quote
Hope you guys can salvage some cars or at least parts. :)

Josh


Wed Nov 12, 2014 1:51 am
Profile
User avatar

Joined: Tue Jun 18, 2013 5:09 am
Posts: 428
Location: Sydney NSW
Car(s): PR91 1967 GT, PR20 1966 1/2 with GT Goodies
Reply with quote
Hi All
Bit of an update
So far so good
Have put 110km on Asroc and she is going great
Boost between 7 - 10psi
O2 sensor Readings -
Full boost 10.5
Moderate load 11.5-12.5
Idle 13.4
Cruising 13.5
Otherwise the 'Butter zone'
Plugs perfect
No pinging
Torque impressive
Let the good times role - hopefully!!!!!!!!!! :)
Cheers
J

_________________

To increase the fun, add a hair dryer


Sun Dec 21, 2014 10:31 pm
Profile
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2816
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
Asroc66 wrote:
Hi All
Bit of an update
So far so good
Have put 110km on Asroc and she is going great
Boost between 7 - 10psi
O2 sensor Readings -
Full boost 10.5
Moderate load 11.5-12.5
Idle 13.4
Cruising 13.5
Otherwise the 'Butter zone'
Plugs perfect
No pinging
Torque impressive
Let the good times role - hopefully!!!!!!!!!! :)
Cheers
J

Fantastic effort...

_________________
'72 PR60 Sport


Sun Dec 21, 2014 11:38 pm
Profile WWW

Joined: Mon Jan 05, 2009 10:39 am
Posts: 1136
Location: Adelaide Hills
Car(s): GU Patrol, AU ute, 1969 florian deluxe, 1976 Luv & 1980 KB 4x4 isuzu
Reply with quote
great to hear!
all that hard work paid off!

_________________
I am "that" Florian guy.
never buy a car you cant push.


Mon Dec 22, 2014 8:06 am
Profile
User avatar

Joined: Tue Jun 18, 2013 5:09 am
Posts: 428
Location: Sydney NSW
Car(s): PR91 1967 GT, PR20 1966 1/2 with GT Goodies
Reply with quote
Hi All
Thought you may be interested
Final 'tweak' (for now anyway)
I bit the bullet (with all the excellent builds posted past and present) plus as a very good insurance measure against detonation
And fitted Water/methanol injector system.
I mounted the injector right under the carby in the inlet manifold for best effect
Pulls like a Malley Bull
Cheers
J


Attachments:
image.jpg
image.jpg [ 2.53 MiB | Viewed 29970 times ]
image.jpg
image.jpg [ 1.96 MiB | Viewed 29970 times ]

_________________

To increase the fun, add a hair dryer
Sat Jan 31, 2015 11:23 pm
Profile
User avatar

Joined: Tue Oct 28, 2008 12:17 pm
Posts: 2611
Location: Rye Park, N.S.W.
Car(s): Doris, AuntyMary, Shrek, Jimmy; GT, Wasp, Flo & Sed unrestos; 65 Elf; 82 Rodeo, 60 TX550, 72 Sport, & a Sigma.
Reply with quote
Great news James, this is one impressive build. May you have plenty of enjoyment, as you no doubt will!
Cheers, Matt.

_________________
Life is far too short not to fill it with what you love. - Jackie French.[/size]


Sun Feb 01, 2015 10:13 am
Profile
User avatar

Joined: Fri Sep 26, 2008 6:16 am
Posts: 1157
Location: Adelaide north near the hills.
Car(s): Roman Red 1965 Sedan, Mint 67 Sedan Auto, 1967 GT , 1.5x 1967 sedans, 1968 Deluxe Sedan, 1965 Wasp Ute (Resto project)
Reply with quote
nice job there James, still going to send some posters of your cars over.

keep the great work comin...

OZ

_________________
So many toys and so little time to play!!


Sun Feb 01, 2015 12:09 pm
Profile
User avatar

Joined: Tue Jun 18, 2013 5:09 am
Posts: 428
Location: Sydney NSW
Car(s): PR91 1967 GT, PR20 1966 1/2 with GT Goodies
Reply with quote
Hi All
Well I Bit the Bullet and drove Asroc on a 200km test & tune run .......
Holy crap she is one strong FAST 47 yr old car..... Ran perfectly..
Plugs perfect....
Surpassed all my expectations!
Very very happy and even more relieved
Need another gear....4 isn't enough
So much torque don't need to change gears anymore......
:lol:
Cheers
J

_________________

To increase the fun, add a hair dryer


Tue Feb 17, 2015 7:24 am
Profile

Joined: Tue Mar 24, 2009 11:52 am
Posts: 843
Location: Sunshine Coast QLD
Car(s): PR95 PR20 WASP SWB NH Pajero Superchrged NT Pajero BF SR6 Falcon
Reply with quote
Good one James, nice that you are happy with it.

Cheers Geoff


Tue Feb 17, 2015 7:58 am
Profile
User avatar

Joined: Sun Oct 05, 2008 10:21 pm
Posts: 528
Location: Darwin NT
Car(s): Isuzu Bellett, VG Commodore Ute, Custom Chopper
Reply with quote
Right - can I order one of those engines please. ;)

Nice work - can you post a video next please with sound??


Tue Feb 17, 2015 8:30 pm
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 21 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 25 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.