bellett.net https://www.bellett.net/forums/ |
|
off with his head https://www.bellett.net/forums/viewtopic.php?f=13&t=1958 |
Page 1 of 1 |
Author: | gt orphanage [ Tue Jun 26, 2012 10:05 am ] | ||||
Post subject: | off with his head | ||||
Missy has fronted to the operating table ![]() ![]() ![]() ![]() ![]() ![]() Missy is wanting to keep up with rufus [Lewis's car] ![]()
|
Author: | oz_toffa [ Tue Jun 26, 2012 11:43 am ] |
Post subject: | Re: off with his head |
Keep those great pics coming in there Greg. She will keep up with the best of them once your finished. OZ |
Author: | GerryBellettGT [ Tue Jun 26, 2012 12:00 pm ] |
Post subject: | Re: off with his head |
![]() ![]() |
Author: | 67GT [ Wed Jun 27, 2012 1:57 am ] |
Post subject: | Re: off with his head |
NIce looking car that one. How do you go with gakets for these ? I can't find any to rebuild my 1600GT motor. Also has anyone fitted the GT twin carbs to a sedan or florian head ? And what was required ? |
Author: | Glenn [ Wed Jun 27, 2012 3:36 am ] |
Post subject: | Re: off with his head |
another project..... looking forward to this, Greg any signs of the problems now you have the head off ? glenn |
Author: | gt orphanage [ Wed Jun 27, 2012 4:27 am ] |
Post subject: | Re: off with his head |
This is only a small project ![]() 67gt ![]() ![]() ![]() ![]() |
Author: | Glenn [ Wed Jun 27, 2012 4:31 am ] |
Post subject: | Re: off with his head |
GT carbs set currently on another thread, on Yahoo. |
Author: | gt orphanage [ Wed Jun 27, 2012 5:55 am ] |
Post subject: | Re: off with his head |
She needs more than a hone ![]() |
Author: | Glenn [ Wed Jun 27, 2012 6:24 am ] |
Post subject: | Re: off with his head |
Mmm, not so good Greg, |
Author: | 67GT [ Wed Jun 27, 2012 10:08 am ] |
Post subject: | Re: off with his head |
Gt Orph, I have the twin carbs and manifold for the Gt (spare) and was curious about fitting to the Wasp. It has what looks like an alloy Florian head (square inlet ports), but doesn't quite look the same at the mounting bolts ?? |
Author: | 67GT [ Wed Jun 27, 2012 10:08 am ] |
Post subject: | Re: off with his head |
Gt Orph, I have the twin carbs and manifold for the Gt (spare) and was curious about fitting to the Wasp. It has what looks like an alloy Florian head (square inlet ports), but doesn't quite look the same at the mounting bolts ?? |
Author: | gt orphanage [ Wed Jun 27, 2012 10:11 am ] |
Post subject: | Re: off with his head |
The heads are differant but yellow peril may be able to help with the mod as he is doing it. |
Author: | gt orphanage [ Sat Sep 01, 2012 10:41 pm ] |
Post subject: | Re: off with his head |
well the engine is back in the car and i had it running yesterday,it was in a bad state with the block needing sleeving and a few valves replaced with new modified toyota valves before she fired to life again. I fitted a pair of webers to it this time and had to move the brake junction to the fire wall to fit the air cleaners so a brake bleed today a few little tidy ups and a bonnet and i will have three gt,s on the road ![]() ![]() Liz has put her foot down now i have to do Warwick next but i will be side tracked a little with Bruce the first chance i get as i cant see myself driving a bellett auto i plan to fit a gt head twin carbs from missy and a gt gearbox and gt cluster gauges and console and fully rego this one and reduce missy to club rego. I need 1 car with full rego in case i get a urge to go for a drive ![]() qld club rego we can only drive on club trips or 15kms from home so i keep 1 fully regoed. |
Page 1 of 1 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |