bellett.net
https://www.bellett.net/forums/

removal of bushes
https://www.bellett.net/forums/viewtopic.php?f=35&t=3056
Page 1 of 1

Author:  67GT [ Mon Jun 01, 2015 5:26 am ]
Post subject:  removal of bushes

hi Guy's,
I am still working on getting ne suspension bushes made for the Bellett.
Has anyone replaced the bushes on the front lower control arm ?
If so, how did you get the old ones out and new ones in ??
Thanks

Author:  Asroc66 [ Mon Jun 01, 2015 7:36 am ]
Post subject:  Re: removal of bushes

Hi All
I may be a little behind but I spoke to 'Scott' at Superpro last week as I hunted down bushed for the Clutch linkages
btw - Clutch bushes - Subaru Liberty 1989
- End of sway bar - Datsun 1200/120Y (well sort of as the standard hole is 17mm with angled taper however Superpro specifically drilled 12mm straight hole at my request - really helpful guys unlike most )

He spoke to the Research and Development department that informed us that they have measured and catalogued all replacement bushes for 'someone from the Bellett Club' in the recent past

May make things a lot easier?

Cheers
J

Author:  Glenn [ Mon Jun 01, 2015 9:11 am ]
Post subject:  Re: removal of bushes

clutch linkage....... the ones each end of the shaft that runs from engine to side rail ???

any part numbers .... its much easier to buy that way

Author:  Asroc66 [ Mon Jun 01, 2015 9:41 am ]
Post subject:  Re: removal of bushes

Affirmative
Gearbox to likage and linkage to chassis same
Upper sway bar linkage for 1989 Subaru Liberty
Special order as come with whole lot of other Subaru rubbers that are useless to us Bellett people
Superpro happy to special order
Think the no. 1201?
Sweet As Bro
j :D

Author:  Glenn [ Mon Jun 01, 2015 11:09 pm ]
Post subject:  Re: removal of bushes

Asroc66 wrote:
Affirmative
Gearbox to likage and linkage to chassis same
Upper sway bar linkage for 1989 Subaru Liberty
Special order as come with whole lot of other Subaru rubbers that are useless to us Bellett people
Superpro happy to special order
Think the no. 1201?
Sweet As Bro
j :D


this is Suburu Liberty Catalogue....... what one ?

http://www.superpro.com.au/find/superpro-suspension-parts-and-poly-bushings-for-subaru-liberty-bc-bf-1989-1994-/cid-999500239

Author:  Asroc66 [ Tue Jun 02, 2015 2:09 am ]
Post subject:  Re: removal of bushes

Pretty sure its the top sway bar mount
May be the one above in the picture though
Note - sway bar on the Subaru has different top mounts from left to right
I am not sure which side we need
Reference no. 1201
Best ask Superpro
J

Attachments:
Subaru Liberty 1989.JPG
Subaru Liberty 1989.JPG [ 15.56 KiB | Viewed 10143 times ]

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/