View unanswered posts | View active topics It is currently Thu Mar 28, 2024 1:58 pm



Reply to topic  [ 16 posts ] 
GT Brake calipers and pads 
Author Message

Joined: Tue Dec 25, 2018 3:23 pm
Posts: 112
Location: Gawler SA
Car(s): morris cooper s, GTR XU1,PR90
Reply with quote
I am trying to find out what calipers are on my GT. I saw where Davo mentioned that he had fitted a front brake conversion to his GT but I am not sure if these are the conversion ones or genuine GT. The ones that I have do not have any pads and my parts book does not show pictures of Disk brakes. The car came with a photo album that shows these calipers were rebuilt but I will get them checked out as they may have rusted up since the rebuild. I think I may have found some NOS pads for a GT but I have no idea what they look like or dimensions. I would appreciate it if somebody could identify these calipers from the pictures provided and also send me a picture of some front pads. Hopefully they are GT and the pads I have found will fit. Many thanks

Peter


Attachments:
IMG_3231.JPG
IMG_3231.JPG [ 168.66 KiB | Viewed 16580 times ]
IMG_3230.JPG
IMG_3230.JPG [ 151.66 KiB | Viewed 16580 times ]
IMG_3229.JPG
IMG_3229.JPG [ 178.11 KiB | Viewed 16580 times ]
IMG_3228.JPG
IMG_3228.JPG [ 165.26 KiB | Viewed 16580 times ]
Wed Oct 23, 2019 9:13 am
Profile
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2816
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
The pads for the GT are DB52

_________________
'72 PR60 Sport


Thu Oct 24, 2019 1:03 am
Profile WWW

Joined: Tue Dec 25, 2018 3:23 pm
Posts: 112
Location: Gawler SA
Car(s): morris cooper s, GTR XU1,PR90
Reply with quote
Thanks for that Glen, I think that is what is on the box.

Are the calipers that I posted pictures of from a GT? as they came with the car when I bought it

cheers

peter


Thu Oct 24, 2019 1:26 am
Profile
User avatar

Joined: Tue Jun 18, 2013 5:09 am
Posts: 428
Location: Sydney NSW
Car(s): PR91 1967 GT, PR20 1966 1/2 with GT Goodies
Reply with quote
https://yahoo.importmonster.com.au/view ... R91%20PR95

Pricey but available Yahoo Japan

Yes they are GT calipers

Cheers
J


Attachments:
B0BF1C1A-F0BA-4F48-AE10-1A15E839458B.jpeg
B0BF1C1A-F0BA-4F48-AE10-1A15E839458B.jpeg [ 640.21 KiB | Viewed 16552 times ]

_________________

To increase the fun, add a hair dryer
Thu Oct 24, 2019 2:57 am
Profile
User avatar

Joined: Tue Jun 18, 2013 5:09 am
Posts: 428
Location: Sydney NSW
Car(s): PR91 1967 GT, PR20 1966 1/2 with GT Goodies
Reply with quote
Asroc66 wrote:
https://yahoo.importmonster.com.au/view?url=https://page.auctions.yahoo.co.jp/jp/auction/d395520809&thumb=https://wing-auctions.c.yimg.jp/sim?furl=auctions.c.yimg.jp/images.auctions.yahoo.co.jp/image/dr000/auc0510/users/61b9fb41fab22e8dd0e5441cc2acb80024595b55/i-img1200x1200-1571619631nncebg310.jpg&dc=1&sr.fs=20000&title=PR91%20PR95

Pricey but available Yahoo Japan

Yes they are GT calipers

Cheers
J


Attachments:
B63D84F5-010E-44E2-8EFD-BD139702AA11.jpeg
B63D84F5-010E-44E2-8EFD-BD139702AA11.jpeg [ 771.73 KiB | Viewed 16552 times ]

_________________

To increase the fun, add a hair dryer
Thu Oct 24, 2019 3:05 am
Profile

Joined: Tue Dec 25, 2018 3:23 pm
Posts: 112
Location: Gawler SA
Car(s): morris cooper s, GTR XU1,PR90
Reply with quote
Thanks J

hopefully the ones I have found are correct if not I now know where to find some

Regards
Peter


Thu Oct 24, 2019 6:25 am
Profile
User avatar

Joined: Tue Jun 18, 2013 5:09 am
Posts: 428
Location: Sydney NSW
Car(s): PR91 1967 GT, PR20 1966 1/2 with GT Goodies
Reply with quote
No Problems
If you have the brake pads backing plates they can be re-bonded....
Any decent brake shop can get it done
The actual Brake shop in your picture is excellent
Cheaper than getting posted from Japan
Cheers
J

_________________

To increase the fun, add a hair dryer


Thu Oct 24, 2019 7:34 am
Profile

Joined: Tue Dec 25, 2018 3:23 pm
Posts: 112
Location: Gawler SA
Car(s): morris cooper s, GTR XU1,PR90
Reply with quote
Hi J
Unfortunately I do not have any used backing plates only the calipers but my friend has just advised me that the box has DB052 on it so I will have a full set of NOS. You can get lucky sometimes.
Thanks again
Peter


Thu Oct 24, 2019 9:42 pm
Profile

Joined: Tue Sep 16, 2008 11:54 am
Posts: 2542
Reply with quote
Convert it to the kit that's been developed.
Far cheaper, far better, easy to get, fit inside standard wheels and engineer approved.


Fri Oct 25, 2019 10:26 am
Profile

Joined: Tue Dec 25, 2018 3:23 pm
Posts: 112
Location: Gawler SA
Car(s): morris cooper s, GTR XU1,PR90
Reply with quote
Thanks Brett, I have read about the kit you mentioned elsewhere in this section so I will keep that in mind.
Regards
Peter


Fri Oct 25, 2019 11:07 pm
Profile

Joined: Sat Oct 11, 2008 11:30 am
Posts: 405
Car(s): Bellett GT,
Reply with quote
I've used Wayne at Better Brakes Southport for same calipers on the Tassie Devil, good job,knows his stuff,the pads are small square from memory 47115-301 isuzu number out of Gt parts book ,good luck Gerry


Fri Oct 25, 2019 11:37 pm
Profile

Joined: Mon Jan 10, 2011 1:03 pm
Posts: 2419
Car(s): 1966 TEARDROP ...MANUAL ...
Reply with quote
brakes on the gt just another expense ..contrary to some people I didn't just strip it and shelved it I had a plan bit by bit budget to budget this invoice was a small expense on the pr90 it just was beyond me ….cheers davo great it will be back on the road


Fri Oct 25, 2019 11:46 pm
Profile
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2816
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
PR91 wrote:
Convert it to the kit that's been developed.
Far cheaper, far better, easy to get, fit inside standard wheels and engineer approved.


Brett
Do you know whats happened to BGT brakes in Dandenong?

They used to do a full re-build on GT Calipers for around $250 each.

Went past there the other day and it's closed up.

I don't need anything, just curious.

EDIT: they may have moved to Address: 18 Cambria Rd, Keysborough VIC 3173 tel:03 9792 2806

Glenn

_________________
'72 PR60 Sport


Sat Oct 26, 2019 4:59 am
Profile WWW

Joined: Tue Dec 25, 2018 3:23 pm
Posts: 112
Location: Gawler SA
Car(s): morris cooper s, GTR XU1,PR90
Reply with quote
Guys, I have got lucky, I have acquired a full set of NOS front pads and some NOS rear pads as well so there is still stuff out there. Appreciate all your comments and help with this.

Thanks for your comments Davo, going through your photo album I can see you had a plan and was working through it. If you had not taken the time to bag and label all the bits and pieces it would have been a nightmare putting back together not many people would take the time to do that.

No work on the car last week due to me being away and we had a heat wave (total fire ban) so welding and grinding was out of the question. Back into it this week hopefully completing rear quarters and back beaver panel around tail light section.

regards

peter


Sat Oct 26, 2019 10:42 pm
Profile

Joined: Tue Sep 16, 2008 11:54 am
Posts: 2542
Reply with quote
Glenn they've been thru the ringer with changes over the last few years. Mainly health related for the owner.


Sat Oct 26, 2019 10:58 pm
Profile
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2816
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
PR91 wrote:
Glenn they've been thru the ringer with changes over the last few years. Mainly health related for the owner.


Thanks Brett.

All the brake dust etc can't be good either for health. Next time i am around keysborough way i will have a look.

I imagine there wouldn't be the same amount of brake work done on 'old' cars these days either.

_________________
'72 PR60 Sport


Sun Oct 27, 2019 3:31 am
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 16 posts ] 

Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.