bellett.net
https://www.bellett.net/forums/

Bellett Oil Filter
https://www.bellett.net/forums/viewtopic.php?f=40&t=50
Page 1 of 1

Author:  2ldohc [ Wed Sep 24, 2008 12:58 pm ]
Post subject:  Bellett Oil Filter

To kick things off I'll mention that when I was trying to track down an oil filter for the G150 motor (cannister type) they didn't have Bellett on the books (surprise, surprise)

However, they did have Morris 1100 on the books and it uses the same filter cartridge.

I'll post the Ryco filters part number when I find it.

Cheers,
Ross

Author:  PR91 [ Thu Sep 25, 2008 2:44 pm ]
Post subject:  Re: Bellett Oil Filter

is a R2211P.
and they fit Massey Ferguson "grey" tractors and some big Lister air compressors. they fit a couple of other things too, but i can't remember what they are.

i've got a list here somewhere of Bellett filter part numbers that I'll dig out one day.
it has 5 or 6 different filter manufactuers part numbers for most filters on a Bellett, so that helps coz Ryco don't make R2211P anymore, let alone the rest of the filters either.

Author:  2ldohc [ Thu Sep 25, 2008 11:24 pm ]
Post subject:  Re: Bellett Oil Filter

Thanks PR91, that'd be great. It's always a pain trying to explain to Repco or the like what a Bellett is!

Author:  redback [ Thu Oct 09, 2008 2:56 am ]
Post subject:  Re: Bellett Oil Filter

I bought one off Ebay just recently - genuine Isuzu oil filter. Will try to track down the info and pass it on to everyone.

Neil

Author:  BettyBellett [ Fri Dec 12, 2008 1:47 pm ]
Post subject:  Re: Bellett Oil Filter

Reference to replacement oil filter R2211P, Motormate here in Adelaide were able to supply an equivalent -
FLEETGUARD LF566
At $20 they are not given away, but RYCO were not cheap either.

Author:  Farmer [ Wed Dec 31, 2008 12:04 pm ]
Post subject:  Re: Bellett Oil Filter

Thanks, Betty. Gary Carter also found this reference, bought one and fitted it. It's spot on. Apparently they fit some Case equipment, Perkins diesels, etc. and are readily available. Price at the Fleetgard agent in Young (N.S.W.)is $13 inc G.S.T. Try farm machinery places.
ALSO, Ryco R2121P is interchangeable and was still available about a year ago. Happy New Year. Matt.

Author:  Barney [ Sat Aug 15, 2009 3:23 am ]
Post subject:  Re: Bellett Oil Filter

I have used a Wix 51302.
Unsure who sells this brand as it came with the car.

Author:  GTtoo [ Sat Aug 15, 2009 2:38 pm ]
Post subject:  Re: Bellett Oil Filter

And all the above !! You're right 2ldohc, Repco aren't helpful because they need to follow up a bulk order. The lady at the counter said i would need to purchase at least 20 :cry: But Autopro were extremely helpful and can source most expendable parts. Get to know your local Autopro guy, good value.

B. 8-)

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/