http://www.ebay.com.au/itm/Chevy-luv-ut ... 337&_uhb=1
Hey Gricey or Josh, worth it for the dashpad??
Bonus Sunraysias.
Seat looks ok.
Cheers, Matt.
Luv some parts?
-
Farmer
- Posts: 2612
- Joined: Tue Oct 28, 2008 12:17 pm
- Car(s): Doris, AuntyMary, Shrek, Jimmy; GT, Wasp, Flo & Sed unrestos; 65 Elf; 82 Rodeo, 60 TX550, 72 Sport, & a Sigma.
- Location: Rye Park, N.S.W.
Luv some parts?
Life is far too short not to fill it with what you love. - Jackie French.[/size]
-
pa_man
- Posts: 685
- Joined: Sat Oct 10, 2009 7:52 am
- Car(s): 67 Bellett Auto Sedan, 65 Wasp, 73 Chev Luv, 1/2 A Chev Luv, VX Commodore
Re: Luv some parts?
Very nice dash on it, but every bit as hard as removing a Bellett dash! 
A bit strange this one, they put the engine and gearbox (G161) up on Ebay on which Oz_toffa Jumped on it.
They were considering selling the whole thing but a bit Late as Oz had organised to pick up the engine
+ the front bumper panel and bumper (Now on my Luv) and some other bits.
would have been nice in hind sight to get the whole thing but didnt work out that way
Sunraysias are a dime a dozen and breach historic reg. here in SA
Josh
A bit strange this one, they put the engine and gearbox (G161) up on Ebay on which Oz_toffa Jumped on it.
They were considering selling the whole thing but a bit Late as Oz had organised to pick up the engine
+ the front bumper panel and bumper (Now on my Luv) and some other bits.
would have been nice in hind sight to get the whole thing but didnt work out that way
Sunraysias are a dime a dozen and breach historic reg. here in SA
Josh
-
Retroasted
- Posts: 230
- Joined: Tue Aug 14, 2012 10:55 am
- Car(s): Isuzu Bellett, Morris Minor 1000
Re: Luv some parts?
There is a Luv on Facebook in victoria
- Attachments
-
- Screenshot_2014-11-11-17-40-42.png (1.39 MiB) Viewed 56199 times
-
pa_man
- Posts: 685
- Joined: Sat Oct 10, 2009 7:52 am
- Car(s): 67 Bellett Auto Sedan, 65 Wasp, 73 Chev Luv, 1/2 A Chev Luv, VX Commodore
Re: Luv some parts?
There are quite a few advertised at the moment:
http://www.gumtree.com.au/s-ad/bathurst ... 1059779697
Near Farmer, a 72, G161
The one Retroasted is showing is on Rusty Wrecks on Facebook (has come down from $999......keep going)
Not sure of age but is also a G161.
AND there is one here in SA, a 76, G161z.
So no shortage.
Josh
http://www.gumtree.com.au/s-ad/bathurst ... 1059779697
Near Farmer, a 72, G161
The one Retroasted is showing is on Rusty Wrecks on Facebook (has come down from $999......keep going)
Not sure of age but is also a G161.
AND there is one here in SA, a 76, G161z.
So no shortage.
Josh
-
redback
- Posts: 528
- Joined: Sun Oct 05, 2008 10:21 pm
- Car(s): Isuzu Bellett, VG Commodore Ute, Custom Chopper
- Location: Darwin NT
- Contact:
Re: Luv some parts?
Trawling for a Waterpump for my G150 and found this gem of a webpage from US of A......
See page 2 as well for more parts.
http://www.oldsobsolete.com/?s=luv
Sharing the LUV
Neil
See page 2 as well for more parts.
http://www.oldsobsolete.com/?s=luv
Sharing the LUV
Neil
-
Glenn
- Posts: 2826
- Joined: Tue May 10, 2011 2:23 am
- Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
- Location: Melb.
- Contact:
Re: Luv some parts?
redback wrote:Trawling for a Waterpump for my G150 and found this gem of a webpage from US of A......
See page 2 as well for more parts.
http://www.oldsobsolete.com/?s=luv
Sharing the LUV
Neil
pump looks like a SOHC though ?
- Attachments
-
- aaa_waterpump.jpg (43.22 KiB) Viewed 56116 times
'72 PR60 Sport
-
redback
- Posts: 528
- Joined: Sun Oct 05, 2008 10:21 pm
- Car(s): Isuzu Bellett, VG Commodore Ute, Custom Chopper
- Location: Darwin NT
- Contact:
Re: Luv some parts?
Yes Glenn - but I think the outlet is facing the wrong way (down instead of up) - the number doesn't match what I have here as well....
- Attachments
-
- Water pump
- IMGP0572.JPG (658.67 KiB) Viewed 56114 times
-
oz_toffa
- Posts: 1158
- Joined: Fri Sep 26, 2008 6:16 am
- Car(s): Mint 67 Sedan Auto, 1967 GT project , 1.5x 1967 sedans, 1968 Deluxe Sedan, 1965 Wasp Ute (Resto project)
- Location: Adelaide Hills Region
Re: Luv some parts?
are you sure that's still a G150, looks oversized to the max with new pistons etc
she will be sure to run well once its all done and running
OZ
she will be sure to run well once its all done and running
OZ
So many toys and so little time to play!!
-
redback
- Posts: 528
- Joined: Sun Oct 05, 2008 10:21 pm
- Car(s): Isuzu Bellett, VG Commodore Ute, Custom Chopper
- Location: Darwin NT
- Contact:
Re: Luv some parts?
It was only bored out 30 thou' - and it is still running strong after 10 years (2004 that is how old that photo is) - so I must have done something right.
Cheers.
Cheers.
-
oz_toffa
- Posts: 1158
- Joined: Fri Sep 26, 2008 6:16 am
- Car(s): Mint 67 Sedan Auto, 1967 GT project , 1.5x 1967 sedans, 1968 Deluxe Sedan, 1965 Wasp Ute (Resto project)
- Location: Adelaide Hills Region
Re: Luv some parts?
i am still trying to find a plant in China that will make me some water pumps at a reasonable price and less than MOQ of 500 units.
may not be quite as good as original Isuzu one's or maybe even GMB one's, but still something we are all needing sooner or later.
my last pumps came from NZ and water pump warehouse in the US which is now closed down!@#$%^*()(*&^%$#
will keep you all advised of progress.
OZ
may not be quite as good as original Isuzu one's or maybe even GMB one's, but still something we are all needing sooner or later.
my last pumps came from NZ and water pump warehouse in the US which is now closed down!@#$%^*()(*&^%$#
will keep you all advised of progress.
OZ
So many toys and so little time to play!!
-
Glenn
- Posts: 2826
- Joined: Tue May 10, 2011 2:23 am
- Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
- Location: Melb.
- Contact:
Re: Luv some parts?
redback wrote:It was only bored out 30 thou' - and it is still running strong after 10 years (2004 that is how old that photo is) - so I must have done something right.
Cheers.
what paint did you use? High temp paint in colours in a can is very hard to get these days..... and expensive
'72 PR60 Sport
-
redback
- Posts: 528
- Joined: Sun Oct 05, 2008 10:21 pm
- Car(s): Isuzu Bellett, VG Commodore Ute, Custom Chopper
- Location: Darwin NT
- Contact:
Re: Luv some parts?
I am sure it was the VHT rattle can red - I used the same height temp primer which made all the difference in keeping it on the block for all these years. Still looks great now.