RobSA project Bella

Show us your Bellett sedan, Bellett 1600GT, Wasp, Bellett GT Fastback, Bellett Sport, Bellett Wagon or all of the above!

Is RobSA's new PR91W-inspired paint job:

Awesome
22
88%
Not quite awesome
3
12%
 
Total votes: 25

User avatar
Farmer
Posts: 2591
Joined: Tue Oct 28, 2008 12:17 pm
Car(s): Doris, AuntyMary, Shrek, Jimmy; GT, Wasp, Flo & Sed unrestos; 65 Elf; 82 Rodeo, 60 TX550, 72 Sport, & a Sigma.
Location: Rye Park, N.S.W.

Re: RobSA project Bella

Post by Farmer »

Looking goid mate, travel safe. It will be good to see you again and have a yarn.
Cheers, Matt.
Life is far too short not to fill it with what you love. - Jackie French.[/size]
User avatar
RobSA
Posts: 576
Joined: Sat Sep 26, 2009 10:55 am
Car(s): BA Falcon, 68 Bellett
Location: Adelaide

Re: RobSA project Bella

Post by RobSA »

It was, sorry Matt I didn't get enough time to sit down and have a good chat. Felt like I was running around all the time.
If you can't fix it with a hammer, you have an electrical problem!
User avatar
RobSA
Posts: 576
Joined: Sat Sep 26, 2009 10:55 am
Car(s): BA Falcon, 68 Bellett
Location: Adelaide

Re: RobSA project Bella

Post by RobSA »

So Bella made it to Albury. A little bit cold and a few irritating things, but not enough to slow her down. The bugger was the puncture a Jingellic and that the tire place wouldn't repair the puncture coz of where it was. All in all though it was a fantastic trip. Here's hoping I don't have to wait another 3 years for to get to the next one.

Cheers
Rob
Attachments
20161001_095918.jpg
20161001_095918.jpg (173.48 KiB) Viewed 58872 times
If you can't fix it with a hammer, you have an electrical problem!
User avatar
RobSA
Posts: 576
Joined: Sat Sep 26, 2009 10:55 am
Car(s): BA Falcon, 68 Bellett
Location: Adelaide

Re: RobSA project Bella

Post by RobSA »

Well look what turned up for Bella this week :D
Attachments
20161026_171123.jpg
If you can't fix it with a hammer, you have an electrical problem!
PR91
Posts: 2521
Joined: Tue Sep 16, 2008 11:54 am

Re: RobSA project Bella

Post by PR91 »

Where did you source that brother?
User avatar
RobSA
Posts: 576
Joined: Sat Sep 26, 2009 10:55 am
Car(s): BA Falcon, 68 Bellett
Location: Adelaide

Re: RobSA project Bella

Post by RobSA »

And here we have the full gasket set for the blown engine in the shed.
When i pull it down I'm going to check all the bearings and replace the rings to build up a slightly stronger engine for some fun.

:D

Remember though she is still for sale. So if you want to make a deal send me a message.

Cheers
Rob
Attachments
20161029_093454.jpg
If you can't fix it with a hammer, you have an electrical problem!
User avatar
RobSA
Posts: 576
Joined: Sat Sep 26, 2009 10:55 am
Car(s): BA Falcon, 68 Bellett
Location: Adelaide

Re: RobSA project Bella

Post by RobSA »

Well it's update time. Bella is still for sale $2750

Now the fun part. I replaced the head gasket which was easy apart from having to clean the gunk from 100s of years that it hadn't been touched.
Even managed to put in a new rear welsh plug.

So as some of you were aware the headers were old, rusty and no matter how many times I welded them up they cracked at some new location.
Time to rid myself of the hassle.

So I bought a set of Rodeo headers which looked the best value (sort of right pipe sizes, and cheap). You might notice some 90 degree mandrel bends in the first photo.
Didn't use any of them, bought a 45 degree though, which i did use.

They sound quite nice, though I haven't driven it alot, since I finally bought house to do up.
Enjoy the pictures :D
Attachments
Raw materials.jpg
Raw materials.jpg (173.26 KiB) Viewed 57502 times
Flanges.jpg
Flanges.jpg (149.34 KiB) Viewed 57502 times
Finished Pipes.jpg
Finished Pipes.jpg (142.94 KiB) Viewed 57502 times
Underneath.jpg
Underneath.jpg (106.82 KiB) Viewed 57502 times
If you can't fix it with a hammer, you have an electrical problem!
User avatar
Farmer
Posts: 2591
Joined: Tue Oct 28, 2008 12:17 pm
Car(s): Doris, AuntyMary, Shrek, Jimmy; GT, Wasp, Flo & Sed unrestos; 65 Elf; 82 Rodeo, 60 TX550, 72 Sport, & a Sigma.
Location: Rye Park, N.S.W.

Re: RobSA project Bella

Post by Farmer »

Nice! I particularly like the last pic, where they are in place. Always nice when a plan comes together!
Good onya mate!
:) Matt.
Life is far too short not to fill it with what you love. - Jackie French.[/size]
User avatar
1968GT
Posts: 1266
Joined: Tue Dec 23, 2008 2:32 am
Car(s): 1968 PR91 Bellett GT. 2014 ISUZU MU-X, 2016 Jayco 22' Starcraft Caravan, 2013 KIA Reo shopping trolley!!
Location: MUDGEE. NSW

Re: RobSA project Bella

Post by 1968GT »

You have done Well Rob, if I had a different partner, I would buy Bella!!
There is something about your car that I like. :D
BELLETT GT, BELLETT SEDAN, MU-X, D MAX, or ANY ISUZU, or A FORD XR6 TURBO, Premium motoring!!!!
User avatar
RobSA
Posts: 576
Joined: Sat Sep 26, 2009 10:55 am
Car(s): BA Falcon, 68 Bellett
Location: Adelaide

Re: RobSA project Bella

Post by RobSA »

Thanks for the appreciation guys.
Let people know, especially those that need a Bellett in their life ;)
If you can't fix it with a hammer, you have an electrical problem!
User avatar
RobSA
Posts: 576
Joined: Sat Sep 26, 2009 10:55 am
Car(s): BA Falcon, 68 Bellett
Location: Adelaide

Re: RobSA project Bella

Post by RobSA »

Hello from sunny SA ... yeah not, its pissing down.

Well its been awhile now and I think I'm over the sad passing of Bella.
She has now gone to a new home and so ends one chapter in the Bellett history.

I hope Bill and Pauline enjoy Bella as much as I did and she brings them much joy.

So until I get the next Bellett project underway (she is in the shed awaiting finalisation of our house move),
its adios amigos.

Stay safe, healthy and wise.

Cheers
Rob
If you can't fix it with a hammer, you have an electrical problem!
User avatar
Stickman
Posts: 1523
Joined: Fri Apr 10, 2009 11:29 pm
Car(s): 3x1965 PR20(Donkey, Jenny n Bundy) 1 1969 PR20(Percy) 2 1968 PR20(Eugine n GT Donor) 1 1968 PR91 GT, 1 1965 Wasp
Location: Kallangur, Brisbane QLD
Contact:

Re: RobSA project Bella

Post by Stickman »

Fare thee well Bella, enjoy your new home and chapter in life :)
1xB+1xE+2xL+1xE+2xT=BELLETT
RUST isn't a crime
www.gartdesign.com.au
User avatar
RobSA
Posts: 576
Joined: Sat Sep 26, 2009 10:55 am
Car(s): BA Falcon, 68 Bellett
Location: Adelaide

Re: RobSA project Bella

Post by RobSA »

For those playing along at home.
If you are scrolling through Bellas history and come across pictures that are missing, its because I deleted my Photobucket account.
Should you really really need to see that photo drop me a line.

Cheers
Rob
If you can't fix it with a hammer, you have an electrical problem!
Post Reply